Structural trays offer the designer the opportunity to omit cladding rails and purlins, thus
creating a crisp, clean internal finish between primary steelwork.
These long span products can accommodate insulation within
their deep trays and when integrated into built up system
solutions they also allow further insulation to be placed above –
making them particularly suitable for systems where thermal and
acoustic layers are required. To assist with this design
requirement, Alpha Clad’s portfolio also includes acoustic /
perforated structural trays that allow sound to travel through a
percentage of the product’s normally reflective surface.
To ensure a bright, light reflective surface, our standard stock
finish is RAL 9002 Off White Polyester. Other coating options
can be made available but may be subject to minimum order
quantity and/or extended lead times.
A selection of our profile options are shown below:
For further advice on the items shown or the availability of sections that may meet your needs but are not
illustrated, Please contact us direct to discuss your specific requirements.
Structural Trays - Crisp Internal Lines
Profiled Metal Cladding and
Ancillary Supply Specialists
Unique to the majority of suppliers
we are also able to offer a
comprehensive technical service,
issued either as part of the supply
package or as an un-biased
independent consultation service
covering products not included
within our supply.
Design Service
Selection of Trays Available:
If you know the profile you are looking for click on the quick link below:
Quick Link:
AT 100-600
0.75
8.90
2800
2500
3100
65
16000
0.88
10.40
3600
3400
3800
65
16000
1.00
11.90
4100
3900
4400
65
16000
1.25
14.80
4500
4400
4900
65
16000
1.50
17.80
4800
4800
5300*
65
16000
*16m Max Length Capability
Note:
Spans shown in table are indicative only. Figures
are based on:
•
1.50kN/m2 Dead & Super Imposed Load
•
1.50kN/m2 Wind Suction Load
•
L/200 Deflection Limit
AT 120-600
0.75
9.40
3900
3500
4200
65
16000
0.88
11.00
4600
4300
4800
65
16000
1.00
12.50
5000
4800
5300*
65
16000
1.25
15.70
5400
5400
5300*
65
16000
1.50
18.80
5800
5900
5300*
65
16000
*16m Max Length Capability
Note:
Spans shown in table are indicative only. Figures
are based on:
•
1.50kN/m2 Dead & Super Imposed Load
•
1.50kN/m2 Wind Suction Load
•
L/200 Deflection Limit
AT 130-600
0.75
9.60
3900
3700
4200
65
16000
0.88
11.30
4600
4400
4900
65
16000
1.00
12.80
5200
4900
5300*
65
16000
1.25
16.00
5800
5500
5300*
65
16000
1.50
19.20
6200
6000
5300*
65
16000
*16m Max Length Capability
Note:
Spans shown in table are indicative only. Figures
are based on:
•
1.50kN/m2 Dead & Super Imposed Load
•
1.50kN/m2 Wind Suction Load
•
L/200 Deflection Limit
AT 145-600
0.75
9.80
4000
3700
4200
65
16000
0.88
11.50
4800
4500
5100
65
16000
1.00
5300
5000
5300*
65
16000
1.25
16.30
5900
5700
5300*
65
16000
1.50
19.60
6500
6200
5300*
65
16000
*16m Max Length Capability
Note:
Spans shown in table are indicative only. Figures
are based on:
•
1.50kN/m2 Dead & Super Imposed Load
•
1.50kN/m2 Wind Suction Load
•
L/200 Deflection Limit
13.10
AT 160-600
0.75
10.20
4200
3800
4200
65
16000
0.88
12.00
4900
4600
5200
65
16000
1.00
13.60
5500
5200
5300*
65
16000
1.25
17.00
6100
5800
5300*
65
16000
1.50
20.40
6700
6300
5300*
65
16000
*16m Max Length Capability
Note:
Spans shown in table are indicative only. Figures
are based on:
•
1.50kN/m2 Dead & Super Imposed Load
•
1.50kN/m2 Wind Suction Load
•
L/200 Deflection Limit
Structural Tray
Alpha Clad structural trays
eliminate the need for purlins or
cladding rails offering significant
benefits over tradtional
construction methods.
These trays enable fast track
installation and provide long span
structural support to slate, tile and
metal cladding products.
The result is a traditional external
envelope with a clean internal
ceiling finish.
Acoustic Tray
With all the advantages of their
solid counterparts, Alpha Clad
acoustcally perforated trays have
been designed for use in areas
where internal reverberent sound
would create signficant nuisance.
The large pan area is perforated
so when used in conjunction with
absorbent materials such as
mineral wool insulation, systems
can be designed/constructed to
allow sound to travel through a
percentage of the tray’s normally
reflective surface.
Flashings &
Fabricatons
Whether simply creating an
airtight seal, performing a
weatherproofing function or
providing that finishing touch,
Alpha Clad has the knowledge
and technical capability to supply
the solution. From rainwater
goods, louvres and solar shading
to bull noses, soffits and bespoke
flashing fabrications, we have the
capability to meet your needs.
Fixings & Ancillaries
At Alpha Clad we understand the
importance of using ancillaries
that combine ease of use with
good performance. Our specially
developed portfolio ensures we
can supply all your fixing and
accessory needs, covering items
such as:
Carbon steel/stainless steel
self drilling fasteners
Carbon steel/stainless steel
self tapping fasteners
Specialist rivets
Grade A butyl tape sealants
Specialist gun grade sealants
Profiled filler blocks to suit all
profiles within the industry
Fire stop blocks
Insulation stick pins
EPDM Pipe penetration
flashings
Vapour barrier and breather
membranes (where necessary)
Photovoltaic (PV)
panels
Roof mounted solar PV panels,
can be supplied fitted to any
industrial roof, whether pitched
or flat.
Solar PV offers a great
opportunity for your business to
beat rising electricity prices.
Alpha Clad have joined forces wth
a leading solar project developer
enabling us to offer Fully Funded
Solar PV to commercial markets
in the UK.
5.5p/kWh reduced rate
electricity, that is index linked.
Immediate savings on your
electricity bill for 20 years.
Fully funded & maintained
solar installation.*
Lower carbon emissions -
improve your green
credentals.
Monitored remotely to
ensuring optimum
performance.
* conditions apply
Call
Now
Comprehensive
Fastener &
Accessory Suite
Available
Copyright © Alpha Cladding Systems Limited 2014
Website by JS DESIGN
Registered in England No. 06416356
UK VAT No. 997 1144 85
Tel: +44 (0) 1452 504 676
Fax: +44 (0) 1452 504 676
Email: enquiries@alphaclad.co.uk
For these or other Structural Trays
PLEASE CONTACT US
For further information...
Scroll Down for
profile range